SM-KP6 is an adapater plate for Kali Audio LP-6 speakers. Easily installed by removing the 4 side screws from the back panel of the LP-6 and attaching the adapter plate with the same hardware. This bracket is applicable with V2 (2nd Wave) Kali monitors only.
NOTE: The SM-KP6 can be mounted in an inverted fashion (upside down) to allow for a greater tilt angle without the speaker touching the wall.
CAUTION: If your Kali Audio speaker does not say “Wall/Ceiling Mountable” on the lower left of the amplifier panel, DO NOT install this plate, nor attempt to mount the speaker to a wall or ceiling. If you are unsure of your monitor revision, please contact Kali Audio with your Serial Number for confirmation.
NOTE: The SM-KP6 can be mounted in an inverted fashion (upside down) to allow for a greater tilt angle without the speaker touching the wall.
CAUTION: If your Kali Audio speaker does not say “Wall/Ceiling Mountable” on the lower left of the amplifier panel, DO NOT install this plate, nor attempt to mount the speaker to a wall or ceiling. If you are unsure of your monitor revision, please contact Kali Audio with your Serial Number for confirmation.
- Vendor:
- Hal Leonard
- EAN:
- 0
- Minimum Order Quantity:
- 1
- Pages:
- 0
- UPC:
- 813985005034
- Format:
- Studio & Rehearsal Support
- Subtitle:
- Triad-Orbit
- Original Currency:
- USD